User guide

Tips
：
If the dust box is not placed back or not properly placed, robot will alarm and show red
indicator on LCD.
1
2
1
3
1
4
1
5
1
6
1
7
Hold the handle of
dust box and lift it to
take out.
In order to avoid dust
leaking, lift the suction
up when you take out
dust box. Please mind
your speed doing this
step.
Match the bottom with
trash can and swing
dust box gently. You can
mildly beating it along
the edge of the can to
get the dust out.
If you notice that there
is too much dust on
sponge filter, you can
open the lock and take
off the cover.
Pour out the dust on
sponge filter.
Close the cover and
hear " kaca" sound
which shows that it is
placed. Put the dust
box back into the host
and cover it.
22
Sponge filter and dust box cleaning
Open the lock at the
bottom of dust box.
Pour out the dust on
sponge filter.
If you notice that there are
too much dust on inside
along dust box, you can put
the box under running
water to get rid of the dust.
(make it dry under
sunshine for 24 hours)Put it
back into the host after the
box and sponge filter is
completely dry.
Downloaded From Vacuum-Manual.com Manuals