User guide

Tips:
Second time setting
Current time setting
Selection scope: hour is between 0 and 23, minute is
between 0-59.
Under normal circumstance, time display on LCD shows
current time.
Tips:
Selection scope: hour is between 0 and 23, minute is
between 0-59.
Under normal circumstance, time display on LCD shows
current time.
Tips:
1. Now, the label high light, and the
number with time setting is flashing.
2. Set hourandminute via and , each
time press will increase one hour or
minute. While decrease one hour and
minute for .
3. Press again, and then go to
current time setting.
1. After second time setting, and then go to the
current time setting. The disappeared,
and the number with time setting flashing.
2. Set hour and minute via and , each time
press will increase one hour or minute.
While decrease one hour and minute for
,and then press to confirm.
3. Then go to the frequency setting.
Set current time
as 2:08 am, time
display on LCD
should be:
For example:
Set current time
as 12:07 pm,time
display on LCD
should be:
For example:
mode
mode
mode
mode
If you need to cancel first or second timing, please repeat set cleaning time, set the time as 00:00. Then the
label will disappear.
The time interval between two time setting should be more than 4 hours.
16
Downloaded From Vacuum-Manual.com Manuals