User guide

● Press the key on host and get power supply. There would be a
short music tip and at the same time LCD lights for roughly 2 second
and goes off.
Then press key to start robot.●
5.Power On/Pause/Power off
● Press key, it can pause the operation of robot and keep it stay
where it is.
● Press key, power is off and the robot stops running.
On the status of pause, you can reset the cleaning mode, then
press
key again, it will go back to work.
Another way to pause is that, when the robot is working you can
press any key on the host or lift it.
If you want the robot to stop running, you can press key
under pause status, then power is off.
Put the robot back to the charging block after it stops working for
fear that others would trip or step on.
Tips:
Tips:
12
Get power supply and power on
mode
mode
mode
mode
Pause
Power off
● Turn on the power switch on the bottom firstly.
Downloaded From Vacuum-Manual.com Manuals