User guide

Tangle the power cord on the pothook and do not scatter it besides the block
or hold it under the base, in case that robot would get impeded when it turns
back.
1.5m
0. 5m
0. 5
m
There should not be any object at least 1.5 meter in front of the charging
block. Besides, anything with strong reflector is not supposed to stay ahead of
the infrared receiver. For example, ground glass, smooth ceramic vase and
so on. Other wise, the machine shall not detect the charging block.
● You need to charge the robot the first time it works. Put away the full-
charged battery for use to ensure it's performance.
● Charging duration should be around 3 hours.
● Charging is only allowed under the temperature between 0 and 45 degree
and extreme hot or cold would extend charging duration or even
cause damage to the battery.
To make sure the robot is working in saturation, we suggest you
to keep charging connected even though the charging indicator
lasts lighting. At the same time, the system would transfer to
weak current for supplementary charging.
According to actual ground situation, robot can keep working for
around 6 0 minutes after being charged full.
The capacity of battery, which is not used for long time, will get
certain decrease, so the use time can be shorten accordingly.
Tips:
11
Robot Charging
charging
status
charging
status
Indicator
flashing
Indicator
last
lighting
Please do not put the charging block near to the staircase to avoid
accidental cases.
Note:
Enj o y Sma r ter L i fe!
Downloaded From Vacuum-Manual.com Manuals