User guide

11. Alarm function
Dust Sensor Cleaning
The dust sensor is located at the front of dust
entrance. It is able to detect the concentration of
dust so that it can choose efficient mode to work.
We suggest you to clean dust sensor once you
clean dust box to improve work efficiency.
1. Turn off power.
2. Take out dust box and clean it.
3.Wipe the dust sensor with dry cotton cloth.
Note:
The robot will stop working and be alarm and tip sound at the
same time. Please do as bellowing to solve the problem.
Icon Cause of failure Solution Instruction
1. Too much dust in
the dust box.
2. There is too much
dust on dust
sensor.
1. Dust box is not fixed
into host.
2. Dust box is not fixed
properly.
1. Main brush or
driving wheel is
tangled by hair or
cloth.
2. Side brush is
blocked.
1. Clean main brush.
2. Clean side brush
and put it back.
1. Put dust box back
into host.
2. Re-install dust box
and press it down at
the same time.
1. Clean thedust
box.
2. Clean the dust on
dust sensor.
In
order to extend use life, Robot will
alarm even though there is not much
dust inside after several cycles cleaning.
Driving wheel is
suspended.
Low battery.
Put the robot back on
charger to charge.
Put the robot back
manually.
This function can prevent danger of child
or pet lifting the robot when it is operating.
20