User guide

7. Go Back Charging

？

● When robot detects the low battery, it will go back charging

automatically. Now, the battery indicator is yellow. You also can

press button to stop the working and go back charging, and

the color of the battery indicator will not change.

Route description: Robot will search for charging block automatically when it

detects low battery, after the charger connected successfully, the

indicator light flashing.

● To make it easy for robot to search for charging block, you need to put the

block back to the wall and make sure there is no obstacle within 1.5

meters ahead of the infrared receiver. Check carefully whether there

is strong reflector in front of the charger, such as ground glass,

smooth ceramic vase and so on.

● It takes time for robot to seek the charger. Robot can reserve enough

battery to go back the charging block.

● If put the robot in a strait room, please make sure that there is enough

space for robot to go back charging.

● Robot can return to the charger if the ground situation is not too

complicated. Under extreme circumstance, such as, huge house,

complex layout would bring difficulty for robot to seek for charger. So,

you should help to put the robot back to the charging block.

● Please take care of the first automatic charging, if you find the robot

keeps turning in the certain area after trying several times to seek

back, you can help to place it on the charging block and look

through the charging.

When the robot goes back charging, the main brush will stop working.

And robot shall stay at the charger when it finishes charging and it

transfer to small currency to charge until you start operating.

●

strait room