User guide

8. Cycle Cleaning8. Cycle Cleaning
14
AUTO
AUTO
AUTO
Set Cycle Cleaning
Cancel the Cycle Cleaning
If you need the robot to work in the fixed time every day, please set the
p
rocedure as belowing instruction:
T
urn on the power button, then press the button, robot will
w
ork according to the AUTO mode till it show the low battery and go
b
ack to charging.
● The time you press the button, then robot will start to work at that
time next.
● If you set the Cycle Cleaning, indicator will light on.
● After you set the cycle cleaning, please do not choose another mode,
and also not press button, otherwise, the cycle function will be
canceled. If want to pause the robot, press any button (except power
button). However, when you need to restart the robot, please still
press button. Press any button will cancel the cycle function.
● After set the cycle function, if you need the robot r
eturn to charging,
please pause it at first, and move it to the charging block manually. Do
not press the button, which will cancel the cycle function.
● If you turn off the robot, although you have set the Cycle Cleaning, the
robot will not work when the setting time coming.
● Please make sure the chargin
g block have connected with the electrical
source, otherwise, robot will not work due to the run out of the
battery, even it is in the standby status.
If you need to cancel the cycle function:
Method One: Turn off the power and restart the robot the cycle function
will be canceled.
Method
Two: During the working status, press any button except
power
button) to pause the robot, and then press or or
button, the c ycle fu nction w ill b e c anceled.
;
(
AUTO
Enjoy Smarter Life！