User guide

Note：

Note:

Side brush cleaning

Replace side brush

Driving wheel cleaning

Up-ground height sensor cleaning

Please replace the side brush when it is destroyed.

Please remove the screws,

and take out the side brush.

Please push the new side brush

into the correct position.

Tight the screws.

Side brush is a kind of easy wear part. We suggest you to check it every time it

takes cleaning task. Please change it if necessary.

The host will alarm when the side brush tangled and the lights.

Up-ground height sensor is on the front bottom of robot. It can detect the

height difference above 8 centimeters. We suggest you to wipe the optical

board with dry cotton cloth after it f

inishes task to prevent the dust piling

on it, which would affect its performance.

1. Turn off the power and remove the trash.

2. Invert the robot, and then put it on the even and clean platform.

3. Use dry cotton cloth to wipe

three optical board of up-ground.

Please use the roll brush cleaning gadget to remove the dust or hair on driving

wheel.

If the wheel is tangled by hair or cloth, the host will alarm and indicator

will light.

Up-ground height sensor

Enjoy Smarter Life！