BT Manual ATMAN oo e e nee e wean 66 BRI 510 LU T Lt It 90 ALBEIT mantled G0 et eee et ene ene et n et renew e enr e 112 Congratulations on the purchase of your ECO VACS ROBOTICS DEE BOT! We hope it brings you many years of satisfaction. We trust the purchase of our new robot will help keep your home clean and provide you more quality time to do other things. Live Smart. Enjoy Life.
1. Important Safety Instructions When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THESE INSTRUCTIONS 1.
1. Important Safety Instructions not operate the Appliance in an area where there are lit candles or fragile objects. Do not use in extremely hot or cold environments (below or above 40°CMO4°F). Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts. Do not operate the Appliance in a room where an infant or child is sleeping. Do not use Appliance on wet surfaces or surfaces with standing water.
1. Important Safety Instructions come in contact with water. it must be repaired by the manufacturer or its service agent in order lo avoid a hazard. Turn OFF the power switch before cleaning or maintaining the Appliance. The plug must be removed from the receptacle before cleaning or maintaining the Charging Dock. Remove the Appliance from the Charging Dock, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
1. Important Safety Instructions over the Remote Control, press and remove its Battery Cover. Remove the batteries, and insert the new batteries with the correct polarity. Reassemble the Battery Cover. . Non-rechargeable batteries are not to be recharged. Different types of batteries or new and used batteries are not to be mixed. Batteries of the Remote Control are to be inserted with the correct polarity. Exhausted batteries are to be removed from the Appliance and safely disposed of.
2. Package Contents 2.1 Package Contents Robot Charging Dock + Power Adapter Remote Control with Multi-Function Cleaning Batteries Toot . (4) Side Brushes instruction Manual Mote: Figures and illustrations are for reference only and may differ from actual product appearances. Product design and specifications are subject o changes without notice.
3. Operating and Programming 3.1 Notes Before Cleaning WARNING: Do not use DEE BOT on wat surfaces or surfaces with standing water. Before using the product on a rug with tasseled edges, please fold the Tidy up the area to be cleans by purling furniture, such as chairs, in rug edges under. their proper place. It may be necessary o place a physical barrier at the dags of a drop fo Remove power cords and small objects from the floor that the robot stop the unit from falling over the edge.
3. Operating and Programming 3.2 Preparation o Plug In Adapter e Charging Dock Placement o Install Side Brushes Hots: When DEE BOT completes the cleaning cycle or when battery power gels low, DEE BOT automatically returns to the Charging Dock to recharge itself.
3. Operating and Programming 3.3 Selecting Cleaning Mode €3 AUTO Cleaning Ode A Random Cleaning Pattern (optimized for carpets) will be selected by To switch to a Programmed Cleaning Pattern {optimized for hard floors) default. or switch between theses two palpates, perform the following action: H Note: Cleaning pattern cannot be switched until DEE BOT is paused or charging. DEE BOT will start a new cleaning cycle once cleaning pattern is switched.
3. Operating and Programming {3 spot Cleaning Mads (Less then 3 minutes) @ R All the functions mentioned above can be enabled on the App. Download ECO VACS App 1o access more features, Including Edge Cleaning, Scheduled Cleaning, efe. App Store () ECO VACS HOME b 0SS0 or later B Android 4.
3. Operating and Programming 3.4 Pause, Wake Up, Power Off o Pause 0 Wake Up Note: The robot's Control Panel stops glowing after the robot is paused Y. for a few minutes. Press the AUTO Mode Button on DEE BOT to wake Press the AUTO button on DEE BOT to wake R up up the robot. A W &) Power OFF OFE Hots: When DEE BOT is not working, it is recommended o keep i switched ON and charging.
4. Maintenance Before performing cleaning and maintenance tags on DEE BOT, turn the robot OFF and unplug the Charging Dock. 4.
4. Maintenance 4.2 Main Brush and Side Brushes Note: A Mull-Function Cleaning Tool is provided for easy maintenance. Handle with cars, this cleaning tool has sharp ages.
4. Maintenance Note: Before cleaning the robot’s Charging Contacts and Charging Dock Pins, tum the robot OFF and unplug the Charging Dock. 4.
5. Indicator Light and Alarm Sounds DEE BOT will tell you something is wrong with an alarm indicator light and sounds. More detailed support is available through the ECO VACS App and online website.
6. Troubleshooting Ho. Compunction Possible Causes Solutions DEE BOT is not switched ON. Switch ON DEE BOT. DEBT has not connected to the Charging | Be sure that the robot’s Charging Contacts have 1 | DEE BOT is not charging. Dock. connected to the Charging Dock Pins. Re-activate the battery. Switch ON DEE BOT, Place . . DEE BOT on the Charging Dock by hand, remove after The battery is completely discharged. charging for 3 minutes, repeat 3 times; then charge normally.
6. Troubleshooting No. Malfunction Possible Causes Solutions . : e Program DEE BOT fo clean at specific mes using the Time Scheduling function is canceled. ECO VACS App. The Continued Cleaning function is muted ON and DEE BOT has just finished cleaning This is normal. No solution necessary. the scheduled cleaning area. DEE BOT does not clean automatically at the scheduled DEE BOT is switched OFF. Switch ON DEE BOT. time. Keep DEE BOT switched ON and connection to the The robot’s battery is low.
