Operating Guide

7
EN
3. Operating the Robot
3.2 Attach the Cleaning Pad
3.4 Install the Safety Tether
3.3
Assemble the Power Adapter
Turn WINBOT 8 over and attach the
Cleaning Pad to the Velcro smoothly. The
white side of the Cleaning Pad attaches
to the Velcro, and the grey microfiber side
faces out. Make sure the Cleaning Pad is
placed exactly within its Velcro area and
does not cover the Fan or Edge Detection
Sensors.
A
B
C
DD
End A: Robot Power Cord End B: Power Adapter Power Cord
End C: Safety Pod End D: Safety Tether