Operating Guide

12
EN
3. Operating the Robot
3.9 Stop
When WINBOT 8 completes its cleaning cycle, it returns to the place it started and beeps.
Remove WINBOT 8
Remove the Safety Pod.
Power OFF
Unplug WINBOT 8
1
3
2
4
OFF
Grasp WINBOT 8’s Handle. Press and
hold
for approximately 5 seconds and
the fan will stop. Remove WINBOT 8 from
the window. Polish away any marks left on
the glass from WINBOT’s removal with the
provided Finishing Cloth.
Polish away any marks left on the glass from
the Safety Pod’s removal with the provided
Finishing Cloth.
Move the Power Switch to the “
o
” position.
If WINBOT 8 has a problem and the Indicator Light glows RED, it can be reset by pressing
the Reset Button on the Remote Control.
*