Operating Guide

9
EN
WINBOT is recommended to be used with WINBOT Cleaning Solution. Using other cleaners
may reduce WINBOT’s performance.
3. Operating the Robot
*
3.5 Place the Safety Pod
3.6 Spray Cleaning Solution
Wipe the surface of the Safety Pod’s suction
cup clean with the provided Finishing Cloth.
If WINBOT 8 is being used to clean an inside
window: Press the Safety Pod FIRMLY on the
top corner of the inside window. Make sure
the Safety Pod is attached securely in place.
If WINBOT 8 is being used to clean an
outside window: Press the Safety Pod
FIRMLY on the inside of the window being
cleaned. Make sure the Safety Pod is
attached and securely in place.
Spray the upper and lower sides of the
Cleaning Pad with the provided WINBOT
Cleaning Solution 5 times each.
After spraying, wipe the bottom of WINBOT 8
with the provided Finishing Cloth.