Operating Guide

8
EN
3. Operating the Robot
If the length of the power cord restricts WINBOT 8’s movement, a WINBOT Extension
Cord can be used. Disconnect End A and End B, and connect them with both ends of the
Extension Cord respectively and tighten.
Only one Extension Cord can be used with WINBOT 8.
*
*
Loop one end of the Safety Tether to
End A on the Robot Power Cord and
tighten.
Connect End A and End B and tighten.
Loop the other end of the Safety
Tether around the Safety Pod’s
channel and pull it tight.
1
2
3