Instruction Manual

EN
46
Daily Maintenance
HEPA Filter
Brush Roller
Press the HEPA release button and gently pull
out the HEPA to remove the dust. Do not start
the appliance when the HEPA is not installed.
Use a coin or other tool, to unlock the brush
roller lock, then remove the brush from the
brush window.
Gently clean the transparent brush window. After the cleaning, install the brush into
the machine.
Remove the hair and debris wrapped
around the roller with Tineco Hair
Cleaning Tool.
The HEPA can be washed under running
water if necessary, and should be dried
completely before reinstalling.
Warning:
• The power brush contains electrical components that cannot be soaked or washed with water.
1
3
2
4