Instruction Manual

Note:

• Clean the dustbin and lters every time after use.

• When air channel blocked indicator blinking, clean the pre-lter thoroughly with cleaning tool.

To maintain better performance, wash the pre-lter once a month and dry up, replace it after

6 months of use.

Also, please wash the HEPA every 3 months and dry up, replace it after 1 year of use.

Press the dustbin release button, pull out

the dustbin.

Twist anti-clockwise and remove the lters.

Insert the clean pre lter into mesh lter

properly, a “click” sound will be heard once

right into place. Install the clean dustbin

and lters back into the main body, then

reattach the dustbin cover.

Warning:

• Do not wash the dustbin as there is a dust

sensor inserted. Please make it completely

dry with a hair dryer if it meets water.

Clean with wet cloth. Do not allow water to

enter the appliance, especially not into motor

and battery.

Clean the dustbin and mesh lter with wet

cloth. The two parts should be air dried

completely before reinstalling.

Dustbin and Filters (mesh lter, pre-lter and HEPA lter)

①

②

③

④

Daily Maintenance