SERIES ES Smart Vacuum Cleanerr Bedienungsanleitung Instruction Manual Manual De Uso Mode D’emploi Manuale D’istruzioni
CONTENTS EN Important Safety Instructions............................................................. 27 Overview.............................................................................................. 30 Accessory Instructions ........................................................................ 32 Assembly ............................................................................................. 34 Product Operation.............................................................................
Important Safety Instructions SAVE THESE INSTRUCTIONS Household use only. When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 27 EN WARNING – To reduce the risk of fire, electric shock, or injury: 1.
EN Important Safety Instructions 16. For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 17. Use appliances only with specifically designated Tineco battery packs. Use of any other battery packs may create a risk of injury and fire. 18.
Important Safety Instructions Note: This equipment has been tested and found to comply with the limits for a Class B digital appliance, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EN Overview A B C D E F G H I J K L A. Dust sensor G. Switch lock B. Digital display screen H. Dustbin release button C. Dust empty release button I. Switch button D. Dustbin J. HEPA release button E. AUTO/MAX button K. Battery indicator light F. WiFi reset button L.
Overview EN Digital display screen A B C D E A. Brush roller tangled C. Air channel blocked B. Dust monitoring loop D. Tineco logo (Red to blue according to the dust E. Dust sensor malfunction amount) F.
Accessory Instructions Note: • Test an accessory on a small, inconspicuous area before use on sensitive surfaces. • The “Product Components” page shows which accessories are included with your purchase. • As shown below, there are many components compatible with this model. If you require more accessories, please visit the Tineco Official Site. EN BUY ONLINE www.tineco.com Products Parts and Accessories Buy Now Full-size LED multi-tasker power brush Ideal for both hard floors and carpets.
Accessory Instructions Flexible long crevice tool Easy to bend, easily gets into the tight spots. Suitable for cleaning dust beneath furniture, along side the refrigerator, tight space behind sofa, and more. Perfect for hard floors, especially sensitive wood floor. Picks up coarse and fine dirt at the same time. Multi-angle folding tube One articulated joint makes it adjustable, clean from high to low place with flexibility.
Assembly EN Install the Tube Insert tube. Press the release button and remove tube. Install the Brush Insert the power brush. Press the release button and remove power brush.
Assembly Install the Dustbin ② Incline the dustbin, the slot on the dustbin towards the hook on the main body. Push upward until the hook fixed into the slot. A “click” sound will be heard when it has been successfully accomplished. To better clean the dustbin, press the dustbin release button and pull out. Install the Battery Press the battery release button, then pull the battery out. Slide the battery into the bottom of the main body. The battery will click into position when correctly fitted.
Product Operation Start to Work Note: EN • Before the first use, please charge the appliance (see “Charging the Battery”) for 3-4 hours in an area where the temperature is higher than 39.2°F (4°C) but lower than 104°F (40°C), and the above charging time based on the condition that the battery is cooled. • Select the accessories according to needs (see “Accessory Instructions”). Press the switch button, the appliance will start to work. Pull the switch lock for continuous power mode.
Product Operation • After using the appliance, it is recommended to put it on the wall-mounted dock for recharge and storage. EN click Warning: • Please make sure there is no gas, water or electrical cables and wires behind the mounting area. • To avoid the dock dropping down, please make sure it must be installed firmly. Assemble the two parts of the bracket, a “click” sound will be heard when it has been successfully accomplished.
Product Operation Cleaning Mode Selection AUTO mode • In AUTO mode, the color of dust monitoring loop changes along with the dust amount. The color change from red to blue as the place getting cleaner. You can get the best cleaning solution automatically. EN Start in two ways: ① ② The default setting is AUTO mode after starting up, 3s to check blockage and then detect the amount of dust. If no dust detected, the power is reduced to cruise power.
Product Operation App • All the functions can be performed using the Tineco App. Download Tineco App to access more features. Download on the GET IT ON App Store Google Play EN Tineco iOS 9.0 or later Android 5.0 or later App Function Introduction Battery Battery level in real time. Cleaning Performance 0 /0 dust Cleaning report min Total dust: 0 dust/0 min Display the dust amount, working hours and working status. Suction adjustment Manual mode, swipe the phone screen to adjust suction power.
Product Operation Contact us You can contact the Customer Service about any problems during the working hours. Feedback EN If you have any comments, please send us your feedback in text, picture, or videos. Note: • Please keep your hands dry when using it. Empty the Dustbin When finished, press the release button on the side of the dustbin and empty the contents. Reattach the dustbin’s bottom cover.
Product Operation Charging the Battery EN • The adaptor will charge the battery on the main body first and then charge the extra battery (sold separately for PURE ONE S11). Connect the adaptor to docking station and outlet. Charge the battery installed on the main body, or charge the battery separately. Warning: • Charge the unit only with the adaptor from Tineco. • When you won’t use the lithium battery for a long time, please store in a cool dry place.
Product Operation Working Time • Working time last about 40 mins on AUTO mode, about 10 mins on MAX mode. • Data is obtained by Tineco laboratory using one battery and non-motorized accessories. EN Charging Time • A full charge takes about 3-4 hours. • Based on results from Tineco lab tests. Lab test environment: temperature between 39.2°F (4°C) to 104°F (40°C). Indicator Light On Work Battery Indicator Three solid blue lights: Full power. Two solid blue lights: Medium power.
Product Operation Blinking: The sensor inside the dustbin is blocked or the dustbin is not installed properly. Light up: Successfully connected. EN Blinking: Connecting to the network. Off: WiFi is not connected, please connect to the network. During Charging • First charge the battery installed on the main body and then charge the extra battery (sold separately for PURE ONE S11). The extra battery is only charged when the one on the main body is full.
Daily Maintenance Note: • Clean the dustbin and filters every time after use. • When air channel blocked indicator blinking, clean the pre-filter thoroughly with cleaning tool. To maintain better performance, wash the pre-filter once a month and dry up, replace it after 6 months of use. Also, please wash the HEPA every 3 months and dry up, replace it after 1 year of use. Dustbin and Filters (mesh filter, pre-filter and HEPA filter) 2 Press the dustbin release button, pull out the dustbin.
Daily Maintenance EN Pre-filter Please turn off the appliance before cleaning and take out the dirty pre-filter from the mesh filter-holder. Replace a clean filter to the main body. Put the dirty pre-filter into the cleaning tool and connect the cleaning tool to the main body. Activate the appliance on MAX mode, and rotate the side cover to clean the dirt pre-filter. Then remove the filter for backup after cleaning.
Daily Maintenance EN HEPA Filter The HEPA can be washed under running water if necessary, and should be dried completely before reinstalling. Press the HEPA release button and gently pull out the HEPA to remove the dust. Do not start the appliance when the HEPA is not installed. Brush Roller 1 2 Use a coin or other tool, to unlock the brush roller lock, then remove the brush from the brush window. Remove the hair and debris wrapped around the roller with Tineco Hair Cleaning Tool.
Product PURE ONE S11 SERIES Voltage 21.6V Rated Power 450W Dustbin Capacity 0.6L Charging Time 3-4 hrs Charging Input (NA) 100-120V~ Charging Input (UK) 100-240V~ Running Time (2*2000mAh Li-ion) 30*2 min. (MAX mode: 9*2 min.) Running Time (1*2500mAh Li-ion) 40 min. (MAX mode: 10 min.) WiFi Frequency Bands 2.4G WiFi Maximum Output Power 19dB Disposal • The battery contains materials that are harmful to the environment and must be removed from the appliance before it is discarded.
Troubleshooting Problem EN The appliance doesn’t work Weak suction power Possible cause Solution No power Charge the battery AUTO protection for overheated temperature Restart after cooling The appliance is blocked (such as tube, suction mouth or some other parts) Check and remove blockages Dustbin and filters are full of dust Clean the dustbin and filters The pre-filter is not installed Install the pre-filter The appliance is blocked (such as tube, suction mouth or some other parts) Remove
Troubleshooting Possible cause Solution Indicator light blinking on work Motor failure Check the motor and cool it down Brush roller tangled indicator blinking The brush roller is blocked Remove blockages Air channel blocked indicator blinking The appliance is blocked, or full of dust in filter and dustbin Remove blockages, clean the filter and dustbin Dust sensor malfunction indicator blinking 1. The sensor inside the dustbin is blocked 2. The dustbin is not installed 1.
Warranty THE 2-YEAR LIMITED WARRANTY Applies to purchases made from authorized retailers of Tineco. According to the requirements outlined in this instruction manual, subject to the following conditions and exclusions. EN WHAT IS COVERED? • Your Tineco machine has a 2-year warranty against original defects in material and workmanship, when used for private household purposes in accordance with the Tineco Instruction Manual. Motorized accessories and battery bought separately come with a 1-year warranty.
Warranty WARRANTY LIMITATIONS • Any implied warranties relating to your machine including but not limited to warranty of merchantability or warranty of fitness for a particular purpose, are limited to the duration of this warranty. • Warranty coverage applies to the original owner and to the original battery only and is not transferable.
SOMMAIRE Consignes de Sécurité Importantes..................................................78 Description ..........................................................................................82 Instructions pour les Accessoires ......................................................84 Fonctionnement du Produit...............................................................88 Entretien Quotidien............................................................................96 Spécifications ................
