Operating Guide

EN
11
3. Operating and Programming
Set Cleaning Pattern
Random Cleaning Pattern (default pattern) Programmed Cleaning Pattern
3.3 Cleaning Pattern and Cleaning Mode Selection
DEEBOT has 2 Cleaning Patterns and several Cleaning Modes to choose from to effectively clean
different oors. Cleaning Patterns and Cleaning Modes are selected using the Remote Control or
the ECOVACS App. For more information on the ECOVACS App, see the separate ECOVACS App
leaet.
Set the cleaning pattern based on oor type.
Random Cleaning Pattern is the robot's default
pattern and should be set when cleaning
carpet. In Random Pattern, DEEBOT cleans
in a straight line and changes directions when it
meets an obstacle.
Programmed Cleaning Pattern should be set
when cleaning bare floors. In Programmed
Cleaning Pattern the robot plans the most efcient
route, cleans in a back and forth straight-line
pattern, returns to clean missed spots, then cleans
room edges before completing the cleaning cycle.
When Programmed Cleaning Pattern is Set:
*
DEEBOT automatically conducts route planning when cleaning. If the robot is paused, moved
manually or directed by the Remote Control during cleaning, DEEBOT will recongure the route
and restart. Therefore, avoid using the Remote Control or moving DEEBOT manually when it is
cleaning to ensure efciency.
*
DEEBOT may pause temporarily to recalculate its cleaning path. This is normal. Please be patient,
the frequency and duration of the pause is determined by room complexity.
*
If the cleaning environment contains both bare oors and carpet, barriers (for example a closed
door) should be set between different oor types and cleaning patterns should be set accordingly.
If both oor types are to be cleaned in one cleaning cycle, Random Cleaning Pattern should be set.