Users Manual Part 1
12
EN
Keep the area around the Station clear of objects and reective object surfaces.
Wi-Fi Connection
Charging DEEBOT
Before Wi-Fi setup, make sure DEEBOT, mobile phone, and Wi-Fi network
meet the following requirements.
DEEBOT and Mobile Phone Requirements
• DEEBOT is fully charged and the power switch of DEEBOT is turned on.
• Wi-Fi status light slowly ashes.
• Turn off mobile phone’s cellular data (you can turn it back on after setup).
Wi-Fi Network Requirements
• You are using a 2.4GHz or 2.4/5 GHz mixed network.
• Your router supports 802.11b/g/n and IPv4 protocol.
• Do not use a VPN (Virtual Private Network) or Proxy Server.
• Do not use a hidden network.
• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
• WEP EAP (Enterprise Authentication Protocol) is not supported.
• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North
America (refer to local regulatory agency).
• If you are using a network extender/repeater, the network name (SSID) and
password are the same as your primary network.
Please be aware that the realization of intelligent functions such as remote
startup, voice interaction, 2D/3D map display and control settings, and
personalized cleaning (depending on different products) requires users to
download and use ECOVACS HOME App, which is constantly updated. You
need to agree to our Privacy Policy and User Agreement before we can process
some of your basic and necessary information and enable you to operate the
product.If you do not agree with our Privacy Policy and User Agreement, some
of the aforementioned intelligent functions cannot be realized through ECOVACS
HOME App, but you can still use the basic functions of this product for manual
operation.
1
2
Assemble OMNI Station
OMNI Station Placement
> 0.5m (1.64’)
> 0.5m (1.64’)
> 1.5m (4.92’)
* If there are reective objects such as mirrors and reective skirting lines near
the Station, the bottom 14cm of that should be covered.
Do not place the Station under direct sunlight.