Instructions / Assembly

SOLAR MOTION SENSOR 155026
Read these instructions carefully before first use. For outdoor use.
PRODUCT DESCRIPTION
FEATURES & SPECIFICATIONS
The Solar Motion Sensor will turn on automatically when a movement is detected in dark places. It will
turn off automatically after 30 seconds.
• Light Source: 12 LED lights
• Output power: 2 lumen each LED, 24 lumen total
• Power supply: 4pcs AA size Ni-Cd 800 mAh rechargeable batteries (included)
• Auto turn off: 30 sec
• Sensor distance: 5m
• Solar Panel type: Monocrystalline silicon
• Light angle: 60 degree
• Function Switch: ON/OFF
• Charging Time: 8 - 10 hours
• Using time: 6 - 8 hours
INSTALLATION
(A) Slide the ON/OFF switch to ON position before mounting.
(B) Unit can be installed into soil ground with included stake. Also can be mounted to any wall with
mounting bracket and hardware (included)
MADE IN CHINA
NOTE:
Solar Panel
12 LEDs
Motion
Sensor
ON/OFF
switch
Battery
Compartment
1. Before the first time use, charge the solar product by placing it under direct sunlight for several hours
before using.
2. When the solar product is not in use for a long time, please remove the battery and store in a cool
and dry place to avoid the leakage.
3. If the battery is exhausted, the light will be dim or stop working. Replace with a new set of 4pcs AA size
Ni-Cd 800 mAh rechargeable batteries
4. Durations of light depends on sunshine exposure to the product, geographical locations,
weather conditions and the hours of daylight.
6.25” x 5” x 9.9” 6.25” x 5” x 15.5”