VIDO Installation Manual

5.0 Controls

Display

1. Heating indicator

2. Cooling indicator

3. Temperature symbol – when this is displayed

the current room temperature is displayed

4. Fan speed symbol (fan blades will rotate when active)

5. Comfort setting

6. Power (on/off)

7. Clock setting

8. Room temperature

9. Time

10. Day of the week

11. Auto setting (to follow set programme) - Full mode only

12. Night set-back setting - Full mode only

13. Holiday setting - Full mode only

14. Program menu - Full mode only

15. Program schedule - Full mode only

Keys:

OK Validation key (OK)

+ Plus key (up)

- Minus key (down)

Navigation left

Navigation right

Turn on Electrical Supply

Easy Mode

(Factory Default)

Full Mode

Use ( ) and ( ) keys to select

operating mode (Refer to

table on page 5)

Setup Parameters

(Refer to table on page 6)

Select Clock

Set Time

Select Comfort Setting

Set room temperature to

desired setting (default 21°C).

Fan runs in heating/cooling

Press & hold (+) & (-)

for 5 secs to change

between modes

Select Auto mode and

press (OK) for 10 secs

Unit Operation

30085 Vido Installation manual NEW WEB.qxp 20/04/2016 17:13 Page 5