installation manual

3
Panel radiators
3
Technical data and radiator dimensions 4
Connections 5
Table of contents
General
The Biasi radiators are produced from high-quality material
and components.
EXCELLENT HEAT OUTPUT
Modern radiators have remarkably low water content to
ensure fast heat-up and high output. The low water content
combined with large convector plates radiate heat in a
highly ecient way.
H
EATING SYSTEM
Biasi radiators are designed for use on closed heating systems,
where the free access of oxygen is prevented. A compact, well
planned and constructed system saves energy and components
making up the system. Draining the system requires more fresh
water, which result in rust on the inside of the steel surface. Due
to this it is not advisable to empty the heating system for the
summer. The water temperature should be between 0 to 210°F
and the pH value between 7 and 9.
PR
ESSURE RATING
The working pressure of Biasi radiators is 87 psi. It must not be
exceeded when planning the heating system. In heating
systems of tall buildings one also has to remember the
dynamic, additional pressure given by the pump, beside the
normal hydrostatic pressure.
All Biasi radiators are pressure
tested during production.
MOUNTING
Current directives and generally accepted practices must be followed when
the radiator is mounted. It is not recommended to remove the plastic cover
until all the construction work is completed. The wall must always be checked
before the brackets are mounted to ensure it can support the weight and use
of the radiator. The
Ecostyle radiators are supplied with clamp bracket for easy
mounting.
APPLICATION ENVIRONMENT
Biasi radiators are intended for heating dry rooms. In case they are
mounted in bathrooms, the mounting must always be on dry walls and
not directly under a shower or similar xture.
Each Biasi radiator is guaranteed for 10 years from the date of
installation against defects caused by faulty materials or manufacture.
The defective product is replaced by a similiar or technically
corresponding radiator.
The guarantee does not cover damages that are due to faulty storage
and handling at delivery or installation, nor damages that are due to
faulty use of the radiator, such as inside and outside rust, use or
corrosive substances, too high pressure or damage due to freezing.
The guarantee does not cover incidental damages caused by th
e Biasi
product, costs for change of product, production loss of the customer,
In case of a guarantee claim the buyer must
contact the seller and present of evidence
of purchase of the product, for example,
-
tion number of the radiator. The defective
product must always be sent back to Biasi for
inspection within one month from the day of
complaint, if not otherwise agreed upon.
Guarantee
Y E A R
Q U A L I T Y
GUARANTEE
10
Output Tables
Correction Factor
Table
7
Thermostatic Valve Adjustment
8
Series Piping
9
Monoow Tee Piping
10
Manifold Piping
11
General / Guarantee
6
8
Radiator Fittings