Instructions / Assembly

Table Of Contents

Installation Guide for T-type Climbing Frame Trellis

Package Contents

• Hollow T-type tube

• Round tubes

• Labor protection gloves

• Nylon rope

Preparation

1. Choose a well-lit area where plants can receive ample sunlight.

2. Prepare the soil by loosening it to a depth of 12-15 inches, removing

any debris or stones.

Assembly Instructions

1. Wearing Safety Gear:

– Put on the labor protection gloves to ensure safety during the

installation process.

2. Trellis Assembly:

– Take one round tube and align it with the upper pre-drilled

holes on one T-type tube. Insert the round tube through these

holes, ensuring it passes straight through to the other side.

Next, take the remaining round tubes and align them with the

lower pre-drilled holes.

– Assemble any additional T-type tubes in the same manner as

described previously. Each T-type tube with round tubes forms

a sturdy T-shape structure.

Installation Steps

1. Positioning the Trellis:

PAGE 1
Installation Guide for T-type Climbing Frame Trellis Package Contents • Hollow T-type tube • Round tubes • Labor protection gloves • Nylon rope Preparation 1. Choose a well-lit area where plants can receive ample sunlight. 2. Prepare the soil by loosening it to a depth of 12-15 inches, removing any debris or stones. Assembly Instructions 1. Wearing Safety Gear: – Put on the labor protection gloves to ensure safety during the installation process. 2.
PAGE 2
– Place the T-shaped structures upright at the prepared site, ensuring they are spaced at an appropriate distance from each other. – Use a hammer to drive the bottom grinding cones of the Hollow T-type tube into the ground. 2. Rope Attachment: – Tie the nylon ropes to the ends of the round tubes.