Specification

Electric Tankless Water Heater
POU 4T
|
POU 6T
Product Attributes
• On-demand, consistent and endless hot water
• Compact, durable and stylish with digital display
• Set temperature in increments of 1°F
• Dimensions: 6” x 11” x 3”
• Heating elements are durable and are threaded for
easy replacement
• 1/2” NPT water connectors for easy installation
• One year warranty for residential use when registered
properly and installed within 30 days of purchase by
a licensed professional
• Solid, hand-welded stainless steel heat exchanger
• Low flow activation at 0.25 gpm
MODEL KW VOLTS BREAKER REQUIRED WIRE WATER CONNECTIONS
POU 4T
3.5 120 30 A 10 AWG 1/2” NPT
POU 6T
6.5 240 30 A 10 AWG 1/2” NPT
Tested and certified
by the Water Quality
Association against
NSF/ANSI 372 for
lead free compliance.
• Handwashing
• Wet Bars
• Strip Malls
• Doctor’s Offices
• Boats
• Recreational Vehicles
• Schools
• Restaurants
• Airports
• Commercial Facilities
• Hotels
• Daycare Centers
Applications
These models are equipped with patented, self-modulating technology so
they will only consume the energy necessary for the specified demand.
Below is a chart showing the flow rate capacity of each model, measured
in gallons per minute for various inlet water temperatures and calculated
for a set output temperature of 105° F.
Temperature Rise
MODEL 40°F 50°F 60°F 70°F
POU 4T
- -
0.5
0.7
POU 6T
0.7
0.8 1.0
1.3
Flow rate shown in GPM based on outlet temperature of 105°F. Inlet temperature varies by region and seasonal changes.
Flow Rate Capacity Chart (GPM)