Full Product Manual

Connect the Smart Device
Let's Get Started!
□
□
□
□
1
Download the Hubspace™ app from the App Store or the Google Play Store to your mobile device.
Launch the app.
To register, enter your email address and a password. Or, log-in if you already.
Bluetooth access is required for device setup.
Verify Your Network
□
□
□
□
2
This Hubspace™ device requires a 2.4GHz Wi-Fi channel.
Most routers provide a 2.4GHz Wi-Fi channel.
Hubspace™ only shows Wi-Fi networks that your device can use.
If you do not see your Wi-Fi netowrk name when you attempt to connect your device, please check your
router settings.
AddaDevice
□
□
□
□
3
In the Hubspace™ app, tap the plus sign in the upper right corner.
Scan your product's QR code. You can nd a copy of the QR code on the device itself and in the Quick Start
Guide.
i. Scan problem?
ii. If the QR code cannot be scanned for some reason, you can enter the code manually. Tap Enter Code and
follow the instructions.
Connect your device to power and follow the instructions on screen.
If you are unable to access the QR code for your light, you can put it into discovery mode with the following
sequence:
Switch the device OFF and ON 5 times. The light will pulse to show that it can now be discovered. In the
Hubspace™ app, tap the plus sign in the upper right corner and follow the instructions to discover devices.
More than one device can be added at a time using this method.
Set up Your Voice Assistant
□
□
4
In the Hubspace™ app, tap the Hubspace button.
Select the Integrations tab, choose your voice assistant and follow the instructions.
10