Item # 1009 647 952 Model # LT11a65KIT400 USE AND CARE GUIDE HUBSPACE KIT- A19 SMART BULB, 6.5FT SMART RGBIC TUNABLE WHITE STRIP LIGHT, SMART PLUG Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.COM/Hubspace THANK YOU We appreciate the trust and confidence you have placed in EcoSmart through the purchase of this kit.
A19 SMART BULB Safety Information WARNING: Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control. WARNING: For indoor use only. Do not use where directly exposed to water. WARNING: This device is not intended for use with emergency exits. WARNING: Not for use in totally enclosed fixtures.
FCC Regulation 12A19060WRGBWH1 FCC ID: 2AB2Q-12A800STQT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Operation 1 Download the Hubspace™ app from the App Store or the Google Play Store. 2 Sign in, or tap Register to create a Hubspace account. 3 To add your bulb, tap the ‘+’ button in the upper-right corner. My Home NOTE: □ Bluetooth access is required for product setup. □ Each smart Hubspace bulb must be set individually by scanning the QR code or by following instruction in the app for manual set up. □ Scanning the QR code is the fastest method for set up.
Operation (continued) 5 Connect your bulb to power and follow the instructions on app screen. NOTE: □ This Hubspace bulb requires a 2.4GHz Wi-Fi network, which most routers provide. □ The Hubspace app will only show Wi-Fi networks compatible with this bulb. □ If you do not see your Wi-Fi network name when you attempt to connect your bulb, please check your router settings or move your product closer to your Wi-Fi router.
Troubleshooting Guide Problem Solution My Hubspace product is not connecting to Wi-Fi. Make sure your product is connected to a power source. Your internet connection or Wi-Fi network may be down. My product cannot find any Wi-Fi networks. Make sure you have a 2.4GHz capable Wi-Fi network within range of the product you are trying to add. Yes. Use the app on a phone with an internet connection like My product is in a location that does not have Wi-Fi. LTE.
Safety Information IMPORTANT SAFETY INSTRUCTIONS Read All Instructions (SAVE THESE INSTRUCTIONS) WARNING: Do not connect more than 32.8 feet (5 pieces) of tape light strip to this single adaptor. WARNING: Do not use if there is any damage to the light or cord insulation. Inspect periodically. WARNING: Do not submerge the flexible light in liquids or use the product in the vicinity of standing water or other liquids.
Installation Layout Considerations □ □ □ 1 □ □ □ Determine the desired location and length of the LED light strip needed for installation. If any cuts are need, follow "preparing the light strip" below. Lightly mark the beginning of run where the Inline Controller (B) and Plug-in Power Supply (C) will connect to the tape.
Installation(continued) 3 □ □ Installing the controller cable Connect the terminal cable from the output of the Inline Controller (B) to the 5-pin end of the light strip. Plug the 24V DC Plug-in Power Supply (C) into an appropriate 120V power outlet. CAUTION: This LED product is designed to be used only with the 24V DC power adaptor included with the kit. Do not operate with any other power supply type. Disconnect power at the source prior to attempting installation.
Connect the Smart Device 1 □ □ □ □ 2 □ □ □ □ 3 □ □ □ □ 4 □ □ Let's Get Started! Download the Hubspace™ app from the App Store or the Google Play Store to your mobile device. Launch the app. To register, enter your email address and a password. Or, log-in if you already. Bluetooth access is required for device setup. Verify Your Network This Hubspace™ device requires a 2.4GHz Wi-Fi channel. Most routers provide a 2.4GHz Wi-Fi channel. Hubspace™ only shows Wi-Fi networks that your device can use.
Operation When light is turned OFF, the Inline Controller (B) will remember the last setting. Connection schematic diagram. Turn on/ Turn off Tape Light(Turn ON: last status) Functions options Color Selection: 8-color Mix 11 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance.
Troubleshooting Care and Cleaning □ □ □ □ Before attempting to clean the light strip, unplug the adaptor from the power outlet. To clean the light strip, use a clean, dry, or slightly damp cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives, as damage to the light strip may occur. Allow the light strip and components to dry thoroughly before plugging the power adaptor back into the outlet.
SMART PLUG Safety Information WARNING: For indoor use only. Do not use in wet locations. The total current limit of the device is 15Amp. To avoid damage, Do not exceed the 15 Amps limit. If a direct short is created on the output, the Smart Plug will be damaged and no longer function. Do not disassemble the product or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact the after sales services.
Warranty 1 YEAR LIMITED WARRANTY This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. Guarantee does not include normal wear and tear, bulbs or batteries. 5003280 Package Contents Part HUBSPACE APP QUICK START GUIDE Description a Power Socket b Indicator Light c Power Button B A a c b Part Description A Smart Plug 1 B Quick Start Guide 1 Installation Insert the Smart Plug into a wall socket Insert the plug into the socket.
Operation 1 Download the Hubspace™ app from the App Store or the Google Play Store. 2 Create an account to sign in or login if you already have an account. 3 Connect your plug to power and follow the instructions on app screen. NOTE: □ This Hubspace device requires a 2.4GHz Wi-Fi channel. Hubspace only shows Wi-Fi networks that your device can use.
Operation (continued) 6 Using your Smart Plug □ □ Turn your Smart Plug on or off from the Home page on the Hubspace app. To set a schedule or timer, tap the name of the smart plug on the Home page. You will see options for setting Schedules and Auto-Off Timers. 7 Set up your Voice Assistant You can connect your smart plug to Google Home and Alexa from the Hubspace app. Or, you can sign in to Alexa app or Google Home and connect to your Hubspace devices from there.
Troubleshooting Problem Solution What devices can be controlled with the Smart Plug? You can control any small appliances (less than max load 1800W) in accordance with the Smart Plug's specifications. My Hubspace device is not connecting to Wi-Fi. Make sure your device is connected to a power source. Your Internet connection or Wi-Fi network may be down. My device cannot find any Wi-Fi networks. Make sure your device is connected to a power source.
Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.COM/Hubspace Retain this manual for future use.
