Full Product Manual
7
4
Control your lighting
See reverse side for specic Amazon Alexa (only if you are using Amazon
Echo Plus) and SmartThings instructions
□ Dimming
The LED bulb will dim to 1% -100% range using the hub app.
Reset to Factory Setting
□ Color Tuning
Use the hub app to adjust Color Temperature (CCT) of the LED bulb.
□ Download or update your hub manufacturer’s app.
□ Turn on the LED bulb with the wall switch.
□ The LED bulb will ash twice when turned ON to indicate that the bulb is in pairing mode.
□ Open hub manufacturer’s app and follow pairing instructions. See reverse side for specic Amazon Eco Plus,
and SmartThings instructions.
□ After successful pairing with the hub the LED bulb will ash twice.
□ Control the LED bulb through your device (the wall switch must remain ON).
□ The LED bulb will be ready to control only after successful pairing to the hub.
□ The LED bulb is not designed to work with wall dimmers or other controlled lighting systems.
□ Works with Amazon Eco Plus and SmartThings hubs only.
□ Refer to hub manufacturing instructions or website for scene setting, scheduling and any other app features.
□ Using the wall switch, physically switch ON and OFF 6 times within 5 seconds.
□ The LED bulb will ash twice after a successful reset.
Basic Instructions
NOTE: Ensure the hub is powered on and within range of this LED bulb.
NOTE: If the bulb will not join the network after repeated attempts, please use the Factory Reset
procedures to clear the bulb’s settings.
Quick Start Guide by App
1
Screw the bulb into a standard E26 socket.
2
Open Amazon Alexa (if you are using Amazon Echo Plus) or SAMSUNG
SmartThings App.
3
Add the smart LED bulb to the hub.
NOTE: 1. You need to unpair the LED bulb from the remote before you connect it to a hub.
2. Remote and App cannot be used at the same time. The bulb will no longer be able to be controlled
through the remote once it's connected to a hub.
HOMEDEPOT.COM/ECOSMART
Please contact 1-877-527-0313 for further assistance.