Full Product Manual

4
1
□
MM
E
NN
Remote Bracket Installation
Using Mounting Screws Sets
Decide upon your placement position and attach the remote bracket with either mounting screws
sets or double-sided adhesive tape
Insert a at blade screwdriver into the groove (MM) to separate two parts of the bracket (C).
Attach the back side of the bracket (C) to a wall or other rm surface with a thickness of over one inch using
the screws (E). Two magnets (NN) are used to magnetize the remote (B) as below.
2
□
Using Double-Sided Adhesive Tape
Peel off the adhesive liner (PP) and attach the bracket (C) to the wall or other rm surface.
Part Description
MM Groove to separate the back side
NN Magnet
Part Description
PP 3M adhesive liner
PP
C
PP
NOTE: To avoid radio signal interference, do not install the remote bracket outdoors, near large
metal objects and mirrors.
Bulb Specication
Model Input Volts (AC) Input Frequency (Hz) Input Watts (W)
A9A19A60WESDZ02 120 9.5
Lumens
(LM)
Efcacy
(LM/W)
800 90
CRI
9060
C