SKU # 1004 541 363 Model # A9A19A60WESDZR1 USE AND CARE GUIDE Remote Controlled LED A19 Color Changing Smart Bulb Kit Questions, problems, missing parts? Before returning to the store, call EcoSmart Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM/ECOSMART THANK YOU We appreciate the trust and confidence you have placed in EcoSmart through the purchase of this bulb.
Table of Contents Safety Information ................................... 2 Zigbee TM................................................... 2 Warranty ..................................................2 Pre-Installation.........................................3 Bulb Specification ................................... 4 Remote Bracket Installation ................... 4 Quick Start Guide by Remote ................. 5 Operation (continued) ............................. 6 Quick Start Guide by App. ..................
Pre-Installation Package Contents Part A Description Quantity A A19 LED Bulb 1 B Remote 1 C Remote Bracket 1 D Reset Pin 1 E Mounting Screws Sets 1 D B C E REMOTE INTRODUCTION KK AA HH BB CC II DD JJ FF EE GG Part Description GG Part Description AA Indicator Light FF Plastic Battery Strip BB ON/OFF GG Reset Button (Pinhole) HH Battery 3V CR2450 CC Dimming DD Color Temperature Tunable II Screw EE Memory JJ Battery Cover KK Groove to pry out the battery
Bulb Specification Model Input Volts (AC) A9A19A60WESDZ02 120 Input Frequency (Hz) Input Watts (W) Lumens (LM) Efficacy (LM/W) CRI 9.5 800 90 90 60 Remote Bracket Installation Decide upon your placement position and attach the remote bracket with either mounting screws sets or double-sided adhesive tape 1 □ Using Mounting Screws Sets Insert a flat blade screwdriver into the groove (MM) to separate two parts of the bracket (C).
Quick Start Guide by Remote NOTE: LED Bulb (A) and the remote (B) in the pack are already paired at the factory. 1 2 3 Screw the LED Bulb (A) into a standard E26 socket and make sure it is powered on. Prepare the Remote (B) and remove the Plastic Battery Strip (FF) beneath the Battery Covering (JJ), Indicator Light (AA) will begin to blink indicating the power is on. You are good to go now! Follow the instructions below to control your lights.
Operation (continued) □ Energize the power for the LED Bulb and position the remote within 2 inches of the LED Bulb. AA BB CC DD EE □ Press and hold the ON/OFF button (BB) and Dimming button The indicator light (AA) will begin to flash. (CC) at the same time for 3 seconds. □ The remote (B) will start to search for the LED bulb (A). The indicator light (AA) will flash rapidly until the LED Bulb (A) is detected. □ During the linking process, the LED bulb (A) will flash three times.
Quick Start Guide by App NOTE: 1. You need to unpair the LED bulb from the remote before you connect it to a hub. 2. Remote and App cannot be used at the same time. The bulb will no longer be able to be controlled through the remote once it's connected to a hub. 1 Screw the bulb into a standard E26 socket. Amazon Alexa (if you are using Amazon Echo Plus) or SAMSUNG 2 Open SmartThings App. 3 Add the smart LED bulb to the hub.
Operation App quick start guide and pairing instructions Works with Amazon Echo Plus □ □ □ □ □ □ □ Open the Amazon Alexa app. Select “Add Device”. Select “Light”. Scroll down the light brand list to select “other”. The LED bulb will connect to Alexa by clicking “DISCOVER DEVICES” (ensure the light is on and in a pairing mode). Set up the device and the “light bulb” now is ready to use. Name and control the bulb. Works with SmartThings □ □ □ □ □ □ □ Open the SmartThings app. Select “Add device”.
Factory Default KK B HH II JJ FF GG GG □ To reset the remote (B), insert the reset pin (D) into the reset button pin hole (GG) and hold for three seconds. This will reset the remote without removing the battery cover (JJ). □ To reset the LED bulb (A), flip the power switch on and off six times within 5 seconds. Low Power Notification and Replacing the Battery □ □ □ □ The indicator light (AA) will blink twice fast indicating that the battery is low.
Troubleshooting Troubleshooting: Control The LED Bulb by Remote Problem The light cannot be turned on. The light cannot be turned on. Possible cause The power is off. The circuit breaker is off. □ The battery power is off. □ The battery is not installed correctly. Plastic battery strip (FF) is not removed. Solutions Ensure the power supply is on. Ensure the circuit breaker is in the on position. Make sure the battery CR2450 is installed correctly and still has power. Remove plastic strip (FF).
Questions, problems, missing parts? Before returning to the store, call EcoSmart Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM/ECOSMART Retain this manual for future use.
