SDS

ECOSCRAPS STARTER + SLOW RELEASE
FERTILIZER (4-2-0)
Page:4/10
Version:
1.0
Date of issue/Date of revision:
06/30/2021
Date of previous issue:
00/00/0000
Methods and materials for containment and cleaning up
Small spill
:
Move containers from spill area. Avoid dust generation. Using a
vacuum with HEPA filter will reduce dust dispersal. Place spilled
material in a designated, labeled waste container. Dispose of via a
licensed waste disposal contractor.
Large spill
:
Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or
confined areas. Avoid dust generation. Do not dry sweep. Vacuum
dust with equipment fitted with a HEPA filter and place in a closed,
labeled waste container. Dispose of via a licensed waste disposal
contractor. Note: see Section 1 for emergency contact information and
Section 13 for waste disposal.
Section 7. Handling and storage
Precautions for safe handling
Protective measures
:
Put on appropriate personal protective equipment (see Section 8). Do
not ingest. Avoid contact with eyes, skin and clothing. Keep in the
original container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous. Do not reuse container.
Advice on general occupational
hygiene
:
Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash hands
and face before eating, drinking and smoking. Remove contaminated
clothing and protective equipment before entering eating areas. See
also Section 8 for additional information on hygiene measures.
Conditions for safe storage,
including any incompatibilities
:
Store in accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials (see Section 10) and food and
drink. Keep container tightly closed and sealed until ready for
use. Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabeled
containers. Use appropriate containment to avoid environmental
contamination.
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
None.
Appropriate engineering controls
:
Good general ventilation should be sufficient to control worker
exposure to airborne contaminants.
Environmental exposure controls
:
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of