Owner`s manual

RECHARGEABLE BATTERY AND CHARGER
The battery in your EcoReco scooter is state-of-the-art rechargeable Lithium FerroPhosphate
(LiFePO
4
, or Li-Iron). It is the most suitable material for vehicular use because it is significantly
lighter and smaller, and provides a longer life than an outdated, toxic Sealed Lead Acid battery.
It also is inherently safer and more environmentally friendly than a Li-Ion battery.
Before first-time operation: Charge the battery for at least 12 hours.
For subsequent charging: Charge the battery until one of the LED lights on the EcoReco
charger turns green. Expect the battery to charge from empty to 85% in 2.5 hours
(recommended) and from empty to full in 4.5 hours.
6
CHARGING TIMES
CHARGING THE BATTERY
Ensure the scooter is switched off, then open the end cap on top of the charging socket
adjacent to the kickstand.
Connect the charger to the scooter’s charging socket, then connect the charger to the power
outlet via the connection cable.
The
battery is charging when both charger LEDs are red. (A mild whirring sound from the fan
is normal during charging.) As soon as one of the LEDs turns green, charging is complete.
Remove the plug from the power outlet, then remove the charger from the scooter’s
charging socket. Close the end cap.
YRETTAB
1.
2.
3.
1 2 3