Owner`s manual

BRAKE
10
The brake lever for the rear wheel brake is on the left
handlebar.
To slow down or stop the scooter when it is powered on and
moving, place your finger(s) over the brake lever and push
in as desired to brake.
The drum brake on the rear wheel does not kick in until
after the brake lever is fully pressed.
As soon as the brake is activated, the accelerator lever on
the right handlebar is deactivated.
Moisture can cause the brake to react more
slowly. For this reason:
“Dry brake” carefully in a safe place after
washing the scooter.
Avoid operating the scooter in bad weather (eg,
rain, snow, or ice).
EKARB
Warnings:
When taking a longer journey in the rain is
unavoidable, please frequently activate the brake
carefully while riding to ensure that the brake
works properly.
Drum brake
Brake lever
To adjust the brake tightness, slightly rotate the screw along
the brake cable near the bottom of the main support bar.
Test the brake effectiveness multiple times before riding
for distances again.