User's Manual

5
6. Ventilation
This projector is equipped with intake and exhaust vents.
WARNING: Donotblocktheseopenings,otherwisetheheatmay
accumulate inside and effect picture quality or cause damage to the
projector.
7. Power
Please use the supplied power cord for the product.
8. Maintenance
Do not attempt to service this projector. It is better to contact
professional and technical personnel for any maintenance needed.
9. Replacement Parts
Whenreplacementpartsarerequired,besuretousereplacement
partsspeciedbythemanufacturer.Unauthorizedsubstitutions
maycausere,electricshock,orotherhazards.
10. Condensation
When the Micro projector is experiencing a major change in
temperature(fromverycoldtoveryhotenvironments),moisture
may condense on the lens and on the internal critical components.
Topreventdamagetotheprojector,youshouldwaitatleast2
hours before using when the temperature abruptly or suddenly
changes. Please refer to the listed operating temperatures.