User's Manual

10
Connect the power adapter to charge/use the
Kickstand Micro projector.
2.PlugthepoweradapterintoDCportontheMicroprojector,then
you can start to use the product while charging.
Entry Level Operation
focus
power
focus
power
power
focus
power
3. To Charge: Slide the power switch forward and hold
it in position. (You will see charging light on top of
housing turn on)
One minute installation guide
SetupyourMicroprojectoronasmooth,even
horizontal surface. Kick out the leg.
Werecommendthatyourstfullychargethe
product before using. Charge for approximately
3hours,ifportableuseisintended.(see3.below)
1. Slide power button in the Power ON direction for
3 seconds. You will see the main Bem screen
projected.
4. Power On: Slide the power switch back for 3
seconds.TheblueLEDlightsturnon,thesystem
starts.
5. Power Off: Slide the power switch forward
momentarily to power off.
Kick Out Leg
Power Adapter