II
Product Overview In order to make sure you get the best possible results from your new Speaker Mojo II, please thoroughly read and carefully follow all instructions in this User’s Manual or on the product. Keep this User’s Manual in a convenient location for future reference. Package Contents: Speaker Mojo II x 1 Power cradle x 1 Power adapter x 1 Micro USB charging cable x 1 Aux cable x 1 User’s Manual x 1 If any of the above contents were missing or damaged, please visit bemwireless.
Product Interface Speaker Mojo II 1. Microphone 2. Volume + 3. Volume – 4. Play / Pause /Speakerphone 5. Power Cradle 6. On/ Off switch 7. Bluetooth© indicator 8. Aux in 9. Micro USB power port 10. Power indicator L M R 15 Power Cradle 11. USB port 12. Power Indicator 13. Charging switch 14. Micro USB power port Stereo Function 15.
Charging Modes 1. Direct Speaker Charge Connect the standard USB end of the supplied USB cable to a USB power source (PC, USB power adapter…etc.). Connect the Micro USB jack to the USB charging port on the Speaker Mojo II. It will take about 2 hours to fully charge the Speaker Mojo II alone.
Charging Modes (Cont.) Indicator on power cradle •• Red LED : Charging, it will go off when it is fully charged; •• Blue LED : power output is on. 3. Wireless Conductive Charging via Power Cradle Connect the standard USB end of the supplied USB cable to a USB power source (PC, USB power adapter… etc.). Connect the Micro USB jack to the USB charging port on the power cradle. The charging indicator will light up while charging.
Charging Modes (Cont.) 4. Charging Other USB Enabled Devices via Power Cradle The included Power Cradle can also be used to charge other USB enabled devices. Simply follow the steps listed in number 2 to charge up the Power Cradle. You can now take the power cradle with you on the go to charge various other smart devices via USB. You can do so by connecting the standard USB end of a USB cable to the USB port in the back of the Power Cradle. Then plug the other end into your smart device.
Play Modes (Cont.) Playing in Mono Mode: Make sure the switch on the bottom of the speaker is switched to “M” before turning on the speaker L R M L M R L L Playing in Stereo Mode: One speaker must be switched to “L” on the bottom and the other must be switched to “R” before turning them on. M M R R L R L R M M Power on / Power off Slide the power switch to “on” to turn on the Speaker Mojo II. The Bluetooth indicator will light up blue to signify the unit is on and ready to be paired.
Play Modes (Cont.) L Single Speaker L R •• Bluetooth mode: Play an audio M signal from the connected Bluetooth device. Before turning the Speaker Mojo II on, turn the speaker over so that the bottom of the speaker is facing up. Locate the stereo switch (L,M,R) on the speaker and make sure that it is set to the “M” or mono setting. •• Now turn on the Speaker Mojo II.
Play Modes (Cont.) •• L Please Note: If an Aux cable is connected to the speaker it will not play music from Bluetooth© connected devices. Stereo Speaker Mode (Two Speakers) •• Bluetooth mode: The Speaker Mojo II has the ability to be connected together with another Speaker Mojo II to enter into stereo speaker mode. To enter into stereo speaker mode, begin by selecting either one of the Speaker Mojo II speakers and slide the stereo L R switch on the bottom of the speaker to “L” M which stands for left.
Play Modes (Cont.) •• •• 10 Note: If you are in Stereo Mode and the “R-speaker” disconnects due to being too far apart, the music playing on the “L-speaker” will pause. In stereo mode the speakers can be no more than 20 feet apart from each other.Once you are back in the above range of operation for the two speakers, they will reconnect by themselves automatically .
Operation Details Audio Use Follow the connection steps to pair a Bluetooth© device with the Speaker Mojo II. At this point you can send any kind of audio signal to your speaker (music, video, gaming, etc.). Just use your device as normal and the audio will play through your Speaker Mojo II. Controls Press the Play/Pause button to play or pause the music when using a music player through your Bluetooth© connected device.
Operation Details (cont.) Speaker Phone After pairing your mobile phone to Speaker Mojo II with Bluetooth, the speaker phone function can be used. •• Making a call: Call will automatically transfer to the speakerphone.
Troubleshooting Issue: Pairing is unsuccessfully after multiple attempts Solution: •• Check if the Bluetooth indicator light is on. If the indicator light is off, please press the power button to turn the unit on. If the Bluetooth indicator light still doesn’t come on after pressing the power button, please charge the unit. •• Check for other Bluetooth devices around the surroundings that may interfere with searching and turn devices off.
Troubleshooting (cont.) •• “R” speaker by sliding the switch on the bottom of each speaker. Be sure to make your mode selection (Mono or Stereo) while the speakers are powered off. Then turn them on. Issue: Interference or static during playback Solution: •• Avoid using the device between concrete or other building structures that may interfere with the signal. •• Please check if the battery level of the unit and the Bluetooth© device and charge if necessary.
Storage •• •• Power off the Speaker Mojo II If the unit will not be used for an extended period of time. Do not set the unit in a damp environment, high temperatures or in direct sunlight. More Info For questions, comments or to purchase more bēm wireless products go to: bemwireless.com You can also follow us at: facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless For information on your product’s warranty go to: bemwireless.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. &KDQJHV RU PRGL´FDWLRQV QRW H[SUHVVO\ DSSURYHG E\ WKH SDUW\ UHVSRQVLEOH for compliance could void the user’s authority to operate the equipment.
IC Caution. - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
Product Name : Speaker Mojo II Model Number : HL2750 Power Supply: 5V,1A Output Power: 1.5W X 2 USB charging output: 5V,1A x 1 Working Range: Approximately 40ft, 12m Working atmosphere: 0˚C-40˚C / 20%-90%RH bēm wireless http://bemwireless.com/ bēm wireless LLC. 1725 Kilkenny Ct. Woodstock, IL.
Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • Always position the unit on a stable and level surface.
Safety Instructions (cont.) Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
bēm wireless | 1725 Kilkenny Court | Woodstock IL 60098 TEL: 855-839-8616 © 2015 bēm wireless
