User's Manual

1110
• The Power cradle features a standard USB charging port
with 5V, 1A power output to charge your device like iPhones,
iPods and smartphones*. Slide the on/off switch on the Power
cradle to “on” to turn on the charging, to “off” to turn off the
charging.
(*Please reference the instructions of device for details. The
charging cable is not included. ) Charging Your Device
Audio Use
Follow the above connection steps to pair a Bluetooth
©
device
with the Speaker Mojo. At this point you can send any kind of
audio signal to your speaker (music, video, gaming, etc.). Just
use your device as normal and the audio will play through your
Speaker Mojo.
Controls
Press the Play/Pause button to play or pause the music when
using a music player through your Bluetooth
©
connected device.
Pressing the + and - buttons will increase or decrease the volume
on the Speaker Mojo. Please note that this will not affect the
volume levels on the connected device.
Connection
Laptop / notebook / PC
As the Bluetooth
©
versions for these types of devices varies
greatly, the connection methods will differ as well. If you
can not connect with the Speaker Mojo using the previous
method instructed you may need to install a new version of the
Bluetooth© driver.
Please reference the instructions of device for details.
Charging
Connect the standard USB end of the supplied USB cable to a
USB power source (PC, USB power adapter…etc.)
Connect the Micro USB jack to the USB charging port on the
unit or power cradle. The charging indicator will light up while
charging. If you put Speaker Mojo into the power cradle, it will
charge them both at the same time weather you connect the
power to the Speaker Mojo or pow
er cradle.
Please note, the Speaker Mojo LED charging indicator will not
light up when the speaker is charging on the Power Cradle
It will take about 2 hours to fully charge the Speaker Mojo alone,
3 hours to fully charge the power cradle and 5 hours for charging
them at the same time.
Charging Indicator Light Modes
Power indicator on Speaker Mojo
• Red LED / Flashing Fast: Battery is low, charge the unit soon;
• Red LED / Flashing Slow: Speaker Mojo is charging;
• Green LED: Battery is fully charged
Note: if the unit has not been used in the past 7 days please
charge for 10 minutes before using the Speaker Mojo
Indicator on power cradle
• Red LED : Charging, it will goes off when it is fully charged;
• Blue LED : power output is on.
HL2739_SpkMojo_UserGuide_Working.indd 8-9 2/25/14 10:46 PM