User's Manual

Getting Started

We know you are excited to experience your new Speaker Mojo.

These two easy steps will get you up and running quickly.

Step 1: Charge It

Connect your Speaker Mojo to an outlet using the USB charging

cable and power adapter. The red LED light will slowly ﬂash

during charging and turn green when it has reached a complete

charge (Approx. 2 hours).

You can also put your speaker mojo onto the power cradle, and

connect it to an outlet using the USB charging cable and power

adapter to charge them both.

Step 2: Connect it

There are two options for connecting to your Speaker Mojo —

wirelessly by Bluetooth© or wired using the included aux cable.

Connect Wirelessly

Once the Speaker Mojo has entered Bluetooth mode, the

is currently in Bluetooth pairing mode will sound. Go to the

Bluetooth settings on your mobile phone, tablet or computer

Speaker Mojo and connected device will pair automatically.

Holding the Play/Pause button for 5 seconds will disconnect the

connected device and enter pairing mode for pairing a new device.

Operation Details

Power on / Power off

Slide the power switch to “on” to turn on the Speaker Mojo. The

Bluetooth indicator will light up to signify the unit is on and ready

to be paired.

Slide the power switch to “off” to turn off the unit and the

Bluetooth indicator light will go out.

Play modes

• Bluetooth mode: play an audio signal from the connected

Bluetooth device.

• AUX mode: play an audio signal from the connected

“wired” device.

Please note, if an Aux cable is connected to the speaker it will not

Step 2: Connect it (continued)

Direct Connection

The Speaker Mojo can also be connected to any device that has

a headphone jack or line out using the included aux cable.

Please note the play/pause button only operates when

connected via Bluetooth.

HL2739_SpkMojo_UserGuide_Working.indd 4-5 2/25/14 10:46 PM