User's Manual

8
AUX out
The Speaker Trio can also be used as a "bridge" to wirelessly connect
you devices to other speakers not enabled with Bluetooth©.
Plug one end of the supplied Aux cable to the “AUX OUT” port in the
back of unit and plug the other end of the cable to an “AUX IN” or
"Line In" port on any other speaker system
Please note, volume + & volume - on the Speaker Trio lose function
on this occasion and only the connected Bluetooth© device or the
connected speaker itself can control the volume.
Charging
Connect your Speaker Trio base to an outlet using the included
power adapter. Place the speakers onto the charging area of the
base. The red backlight will slowly flash during charging and goes out
when it has reached a complete charge (Approx. 3.5 hours).
Charging Indicator Light Modes
•
Red LED / Flashing Fast: Battery is low, charge the unit soon.
• Red LED / Flashing Slow: Speaker Trio is charging
•
Red LED / Turned Off: Battery is fully charged
Note: if the unit has not been used in the past 7 days please charge
for 10 minutes before using the Speaker Trio.
Operation Details
(cont.)
UserGuide_SpeakerTrio_Final2.indd 8 10/24/12 4:33 PM