UserGuide_SpeakerTrio_Final2.
Product Overview Thank you for purchasing the bēm wireless Speaker Trio. Our speaker will bring you a new found freedom from wires while delivering an incredible sound. The Speaker Trio is compatible with all devices enabled with Bluetooth© technology... which is currently a lot of devices! Make sure to read through the following directions, fully charge your device and perform the initial Bluetooth© syncing process and you should be up and running in no time.
Product Interface Base dc in 5v 1 2 aux in aux out 3 4 5 Speaker 6 1 2 3 1. Bluetooth© Indicator 4 2. Power Button 3. DC Input (12V) 4. Aux In 1. Volume Up 5. Aux Out 2. Volume Down 6. Charging Contact 3. Power Button UserGuide_SpeakerTrio_Final2.indd 3 4.
Getting Started We know you’re excited to experience your new bēm wireless Speaker Trio. These two easy steps will get you up and running quickly. Step 1: Charge It Connect your Speaker Trio base to an outlet using the included power adapter. Place the speakers onto the charging area of the base. The red backlight will slowly flash during charging and goes out when it has reached a complete charge (Approx. 3.5 hours). 4 UserGuide_SpeakerTrio_Final2.
Step 2: Connect It There are two options for connecting to your Speaker Trio - wirelessly by Bluetooth© or wired using the included aux cable. • • Connect Wirelessly Turn the power on each of the 3 speakers followed by powering on the base unit. Once the base is powered on the Bluetooth© indicator will light and a tone confirming that the unit is currently in paring mode will sound. Go to the Bluetooth© settings on your mobile phone, tablet or computer to find the device named “Speaker Trio”.
Operation Details Power on / Power off Speakers: Press the power button to turn the speaker on. The white light on the base will light up to signify the unit is on. Press the power button again to turn off the speaker and the white base light will also go out. Base : Press the power button to turn on the base of Speaker Trio. The Bluetooth© indicator will light up to signify the unit is on and ready to be paired.
Controls Pressing the + and - buttons will increase or decrease the volume on the Speaker Trio. Please note that this will not effect the volume levels on the connected device. Connection Laptop / notebook / PC As the Bluetooth© versions for these types of devices varies greatly, the connection methods will differ as well. If you can not connect with the Speaker Trio using the previous method instructed you may need to install a new version of the Bluetooth© driver.
Operation Details (cont.) AUX out The Speaker Trio can also be used as a "bridge" to wirelessly connect you devices to other speakers not enabled with Bluetooth©.
Troubleshooting Issue: Pairing is unsuccessfully after multiple attempts Solution: • • • • Check if the Bluetooth© indicator light is on. If the indicator light is off, please press the power button to turn the unit on. If the Bluetooth© indicator light still doesn’t come on after pressing the power button, please charge the unit. Check for other Bluetooth© devices around the surroundings that may interfere with searching and turn devices off.
More Info For questions, comments or to purchase more bēm wireless products go to: bemwireless.com You can also follow us at: facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless 10 UserGuide_SpeakerTrio_Final2.
Maintenance Please follow the instructions below for cleaning your Speaker Trio • • • Power off the unit Use a soft, dry, lint-free cloth and wipe gently Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored Storage • • Power off the Speaker Trio If the unit will not be used for an extended period of time. Do not set the unit in a damp environment, high temperatures or in direct sunlight. FCC STATEMENT UserGuide_SpeakerTrio_Final2.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. bēm wireless http://bemwireless.com/ bēm wireless LLC. 1725 Kilkenny Ct. Woodstock, IL. USA Made in China Technical Parameters Note: All specifications are subject to change without notice. Product Name: Speaker Trio Model: HL2002A Power Supply: 5V 2.4A Battery capacity: 3.
Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • • • • • • • • Always position the unit on a stable and level surface.
Safety Instructions (cont.) WARNING: • • • Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
UserGuide_SpeakerTrio_Final2.
