User's Manual

13
Operation Details (cont)
NOTE: If the VOLUME DOWN button is pressed often enough or held long enough,
the speaker will stop producing sound until the volume is increased again, but the
speaker will remain on and the music will continue to play.
Lantern Controls
Sometimes you need a little light. Sometimes you need a lot. The EXO-900 offers
the best of both worlds. The simple steps outlined below will walk you through
switching between the lantern’s four different light modes.
1. Press the LIGHT button to turn the light on. It will start in
the “high” setting.
2. Press the LIGHT button again and the lantern will turn
down to “medium.”
3. Press the LIGHT button again and the lantern will turn down to “low.”
4. Press the LIGHT button again and the lantern will turn off.
5. Press the LIGHT button again to go back through the
options listed above.
The lantern may be used/controlled while other functions are in us
e.
USB Charging
The two USB ports on the back panel of you EXO-900
(see “Meet Your New EXO-900” on page 8) can be used
to charge mobile devices. If your device can be charged
with a USB port (refer to your device user guide for
details) simply insert the USB end of your USB cable (not
included) into the speaker and then insert the other end
into your device to begin charging.
USB output2
AUX IN
DC IN
The two USB output DC 5V,1A,only used for charging
with no USB playing function.