Use And Care Manual

9
US
CONTROLS |
The controls are positioned on the front of the
unit next to the air outlet, they are:
• Power Switch
• Ammeter
• Hour Meter
• Remote Humidistat Switch
• Remote Humidistat Connector
EPD150 EPD150-PRO
EPD200 EPD200-PRO
If the dehumidier does not operate:
• Make sure the unit is plugged in.
• Check the fuse
• Check the remote humidistat setting
• Ensure the humidistat (if tted) is turned on
Low Airow:
• Check inlet air lter
• Check inlet/outlets not obstructed
• Check ductwork (if tted) is not obstructed
• Check voltage level
• Check fan is working
If the unit is noisy:
• Check fan operation
• Check rotor drive
• Check for loose screws
Low Dehumidifying Eect:
• Check airows
• Check Amps reading
• Check rotor is turning
Low Amps Reading:
• Check Regen airow
• Check Over-Heat Protector
• Check Heater bank
Rotor Not Turning
• Check belt tension
• Check drive-motor operation
• Check rotor alignment
TROUBLESHOOTING |
OFF
ON
REMOTE HUMIDISTAT
OFF
ON
POWER
A
10
5
A
O
I
O
I
OFF
ON
OFF
ON
POWER
Remote
Humidistat