Installation guide

1. Select the Connector.
2. From the Connector, select the Forms Processing Extender in the Services window.
3. Select the FPE Profile.
14 - Configuring the eCopy Forms Processing Extender
In order to setup the Forms Processing Extender, server properties must be configured prior to creating
templates.
14.1- Specifying Server settings
1. Launch the Administration Console and select Forms Processing Extender in the Services tab.
2. Specify ServerAddress, that is, the local system where the extender is installed. Default value is
"localhost".
3. Set Port: The default value is 19150. Click Search to search the local machine for Nuance installed
components.
Upon completion of the search, the Server Type field will display "Nuance Capture" and the Parameters
section is enabled.
14.1.1 - Server Address hints
When entering the Server Address, be aware of the following:
n If the Server Address field contains a valid IPaddress or DNS name, then the processing is done by
the FormsProcessingServer.exe running on the identified machine.
n If the Server Address field contains "Nuance", the processing is done within the ShareScan Manager
itself, and the process tries matching the scanned pages to the templates contained in the defined
Template Library.
n If the Server Address field contains "Barcode", the processing is done within the ShareScan
Manager itself. This processing does not use templates, instead it reads the first available barcode on
the page (matching the type or regular expression defined for the processing).
14.2- Creating a Template Library
1. Click Launch Configuration Utility under Parameters.
2. The Template Library Manager window is displayed.
You can set the following options here:
n Image folder: enter the UNC path of a Shared Folder, where Forms Processing Extender will store
the images used for the template.