Installation guide

Setting Description
Font The font for the endorsement. When the Font dialog box pops up, use the drop down menu
to set the following font attributes:
l Type (the default value is Arial).
l Style (the default value is Regular).
l Size (the default value is 10) .
l Effects (Strikeout and Underline options are available).
l Color (the default value is Black).
l Script (the default value is Western).
Note: You can see text example in the Sample window.
Font style The style (Bold or Italic) of the font.
Font effects Enables underlining by marking Underline.
Justification The position (Left, Right, or Center) for the endorsement or the text message. The default
value is Right.
10.2.1.5 - Position Settings
Position settings specify where the Bates/Endorsement is put on the page.
Note:
You cannot modify position settings at the device.
Setting Description
Align The alignment (Top, Bottom, or Right). The default value is Bottom.
Margin The distance to place text from the vertical edges of the page. The default value is 0.25.
Units The unit of measurement (inches or millimeters) for the margin. The default value is inches.
10.3- Numbering related documents
The Checkpoints feature enables you to automatically add continuous page numbering to a set of related
documents. Once you have configured a Checkpoint, you can scan any number of documents at any time and
all the pages are numbered sequentially. For example, if you create a sequence called KP1 and select this
identifier before scanning each of two 10-page documents, the pages of the first document are numbered 1
through 10, and the pages of the second document are numbered 11 through 20.
Note:
You must create the Checkpoint identifier before you scan the first document. Also, because Checkpoints are device-
specific, you cannot create a Checkpoint at device A and use the same sequence to scan from device B.