Installation guide

8.8.2 - Role based configuration restrictions
n Renaming an OU is not allowed.
n An OU can be removed from the list by right-clicking the OU and selecting the Remove
Organization menu item.
n The Settings and Scanner tabs are hidden when configuring this feature as they only apply to a
Device/Device Group.
8.8.3 - Device/Role based configuration chart
Device OU/Department All Users Connectors displayed on Main Form
Device
A
None (no Active Connector profiles). None (no
Active
Connector
profiles).
Device Connectors.
Device
A
One or more Active Connectors. None (no
Active
Connector
profiles).
Connectors in OU (default).
Personalization is not available.
Device
A
One or more Active Connectors. One or more
Active
Connectors.
Connectors in OU (default).
Personalization available via My Config button
(Personalization button on the Main form,
through which you can personalize your choice
of Connectors at run time.
Device
A
One or more Active Connectors.
Restrict All Users (menu item, if checked,
restricts the OU/Department from using the
Connectors from the All Users group, that is,
Personalization is restricted).
One or more
Active
Connectors.
Connectors in OU (default).
Personalization is not available.
Device
A
None (no Active Connector profiles). One or more
Active
Connectors.
Connectors in All Users(default).
Personalization is available via My Config
button (Personalization button on the Main
form, through which you can personalize your
choice of Connectors at run time).
8.9- Personalization feature
With this feature you can configure Connectors, make them available for any user. This gives the user the
ability to maintain the user's own personal set of Connector profiles based on the user's login information.
You can personalize the set of Connectors only when Session Logon along with the User Configuration
options are enabled and if at least one or more Connectors are activated in the All Users group.