Installation guide

8.3.1 - To find a device
1. In the Administration Console, right-click the Device configuration tab and select Find device.
The Find device window opens.
2. In the Device name field, enter a device name. As you enter each character, the Search while typing
function searches for a matching device name. If it finds a match, it highlights the device on the
Devices tab.
3. In the Device IP field, enter the complete IDaddress. The system searches for the device.
Note:
If a device is marked with a yellow question mark, it can be pinged, but is not yet ready for communication, or no longer
ready for communication.
8.3.2 - Find Device settings
Option Description
Device name Enter a device name. Type-ahead feature is enabled for the Device Name field. Typing in a
partial name, highlights the device on the Devices tab, if found.
Note: The complete IP address needs to be entered in the Device IP field for the search to begin.
Device IP Enter a device IP value. Type-ahead feature is enabled for Device IP field. The value should
follow an xxx.xxx.xxx.xxx pattern.
Finding Devices
window
The following values are displayed after the search: Device name, Device IP, Vendor, Version,
and Location.
8.4- Creating and deleting device groups
You can quickly create and delete device groups in the device configuration list.
8.4.1 - To create a device group
1. In the Administration Console, right-click Device configuration tab and select Create device
group. A New entry field is created under Device groups.
2. Rename a New entry field , if needed, and press Enter.
3. Once a group is created, drag and drop existing devices or add new devices (by dragging and dropping
from within the Add device window) into the group.
Note:
When creating a device group, ensure that the name of the device group is unique (no device or group can have the
same name).