Installation guide

3. To review and change the scanner settings, press the Scanner settings button on the Preview
screen. The Scanner settings... screen appears. After changing the scanner settings, select OK.
4. To review and change the document settings, select the Document settings button on the Preview
screen. After changing the document settings, press OK.
5. When you are ready to send or store the document, press Next.
7.6.3 - Authenticate and Navigate
1. If the Logon screen appears after you preview the document, enter your user credentials, then press
Next.
2. If you configure the connector to allow navigation, the Folder navigation screen appears. The list
can display 200 entries at one time.
3. Select the target subfolder in the destination folder.
4. Select sub-levels in the list until the complete path appears in the Path field at the top of the screen.
5. When you have selected the destination, press Next.
7.6.4 - Send
1. If the Send screen appears, specify the settings
2. Press Next.
3. Select one of the post-scanning options.
7.6.5 - Post-scanning options
Option Description
Log out Displays the Logon screen. Appears only when Session Logon is enabled.
Done Displays the Home screen.
New
document
Displays the Preview screen and enables you to scan a new document using the current settings.
Place the new document in the feeder or on the glass and then press Scan more.
New destination Enables you to send the scanned document to another connector. Press the button and then
select the target connector from the list. The client opens the target connector and displays the
scanned document on the Preview screen. Press Next and then follow the prompts provided by
the target connector.
8 - Configuring devices
An eCopy-enabled device can be:
n A multifunction peripheral (MFP)
n A scanner that is connected to an eCopy ScanStation