Installation guide

After Session Logon is configured, enabled for a device, and tested, Session Logon is the first screen that
you see at the Client. You must enter a valid username and password to log on to the selected domain. The
ShareScan Manager verifies the credentials and passes them to the selected Connector.
The Connector must also verify the credentials passed to. If the authentication fails, the Connector must
challenge you for the credentials again. The Connector must also display an appropriate error message.
Note:
The ShareScan Manager does not retain the credentials entered for testing.
6.7.5.3 - B ypassing Session Logon
Alternatively, you can use the ShareScan Single Sign On Extender, which enables secure storage (password
caching) of the user’s network passwords for use in a single sign on workflow. This enables the user to swipe
a card (or use any other available method to identify themselves) and have this log the user into eCopy
ShareScan and to access network resources.
For more information on the Single Sign On Extender, click here.
Note:
If no password is provided, available or password caching is not enabled, the user is prompted to enter their password.
6.7.5.4 - Typical Session Logon Workflows
Below, a number of typical Session Logon scenarios are briefly described, walking the user through an
overview of the displayed forms.
Case 1
Prerequisites:Session Logon is enabled, Bypass redirect screen is enabled, External Authentication is
enabled (Equitrac, for example), Single Sign-On enabled, Logoff automatically is enabled, Bypass Session
Logon is enabled.
Workflow:User swipes card, and logs into the External Authentication Provider. Selects the ShareScan
application on the device screen. The Session Logon screen is displayed, with the relevant authentication
data already filled in. The user clicks Next, is transferred to the Main form. After scanning, the relevant
connector forms are displayed in order, then the Session Logon screen is displayed, after clicking through the
final connector form. The Session Logon screen displayed at the end shows empty fields, as the user has
logged off automatically.
Case 2
Prerequisites:Session Logon is enabled, Bypass redirect screen is enabled, External Authentication is
enabled (Equitrac, for example), Single Sign-On enabled, Logoff automatically is disabled, Bypass Session
Logon is enabled.