Installation guide
Setting Description
Port Number The Port number that the ShareScan Manager listens to for ID device (client)
connections. The default value is 9425.
Note: ShareScan Manager and the ID device should be configured for the same port.
Accept UserID only
requests from External
Services
Allows the device to accept User IDs provided by external services, for example
Uniflow, as valid authentication means.
6.7.3.2 -
Setting Description
Type Enables encryption for your Identification service, if appropriate:
l None: Passes credentials to ShareScan without encryption. Not recommended.
l TripleDES: Enables you to encrypt the information from the application that is
supplying the credentials to ShareScan. You can do this by creating an encryption key
that you store on the computer where the Manager is running and on the ID device
Path Set the path for the encryption type to the eCopyKey.txtfile. This file contains the key
specified in the Key field. The ID device should have a copy of this file and use the same
key if encryption is TripleDES. It specifies a path to the storage destination for the
encryption key on the device where the Manager is running.
Key Generates the encryption key and stores it in the eCopyKey.txt file. You must manually
copy this file to the device. If you regenerate the key, you must copy the new key to the
device. The TripleDES key is used for encryption. Click the button on the far right side of
the Key field value area to generate a key.
Note: If the key value is changed, the ID device should take a new eCopyKey.txt file
and use the new value for TripleDES encryption.
Important: All devices that use Identification Services and are managed by the same
Manager must use the same encryption key. After generating a key for the first device,
when you configure subsequent devices you must select the same path you selected for
the first device. ShareScan automatically recognizes the key file that is already in the
storage destination.
Enable for all devices
Enables the service for all devices when selecting the Yes check box; or disables
the service for all devices.
Save button Saves the changes made in the Identification service page.
6.7.4 - eCopy Identification Service Terminal Emulator
eCopy Identification Service Terminal Emulator appears when you click Test in Configuring Service:
Identification.
To configure the emulator, launch the dialog by clicking the Config button on the main dialog.