Installation guide

Setting Description
Type Set the following settings for alphanumeric or numeric type:
l Minimum: Choose between 0 and 1000.
l Maximum: Choose between 0 and 1000.
l Remember: Choose between 0 and 1000.
The default value is 0.
Note: These settings represent the length of the alphanumeric or numeric
string, and not interpreted as a range in case of the numeric field.
Default The default field entry (optional). This value is presented on the client (MFP) form by
default when you enter information into the Activity Tracking fields.
User Modify If set to Yes (default), you are allowed to modify at the client (MFP).
Click OK once you are finished or click Cancel to cancel your selection.
6.7.3 - Identification service
The Identification service is located on the Configure services tab under the Device services section.
Identification services are available on compatible MFP devices that use identification devices such as card
fingerprint readers or proximity cards. Identification service allows the user authentication credentials from
the identification device to be encrypted and passed to ShareScan. This preserves security and streamlines
the logon process by allowing you to avoid entering authentication credentials at the device.
Identification service enables the integration of ID devices with eCopy ShareScan by providing a way for the
third-party applications to send credentials (username, password, domain, or userID) to ShareScan so that
you are not challenged again.
The following settings are available for Configuring Service: Identification:
6.7.3.1 - Identification Settings
Setting Description
Configured
Allows the device to use the Identification service when selecting the Yes check
box; or prohibits the device to use the Identification service (this disables all the
other fields and properties).
Keep connection alive Keeps the TCP connection alive to communicate to the ID device:
l Checked (Yes): Allows pulsing to occur between the ID device and the Identification
service; the TCP socket connection stays open and connected until you log out, times
out, ends the current session, or the ID device terminates its connection.
l Unchecked: Drops its connection to the ID device after it receives the data packet.