Installation guide
installer Wizard screen. If you click OK on this dialog, the application tries to download the license from the Nuance
license server, and install it (this is successful only if the computer running the Administration Console has a working
Internet connection). If for any reason the download fails, you must add or import the license manually as described in
the Licensing Wizard.
When the Administration Console is started, the system checks to see if the IP associated in the registry with the
ShareScan Manager still exists. If not, an error message is displayed, and you have the option to update the IPaddress
(this starts the services, but you have to reconfigure the clients), or you can close the Administration Console.
When you open the Administration Console, the Welcome page lists the main functions in the recommended
order for performing each function:
2.1- Configure the services
Configure one or more installed services, so that they will be available when you configure connectors and
devices. There are three types of services: services that you apply to a connector, services that you apply to
devices or device groups, and services that you apply to connectors and devices. Note: Only the services
that you have valid license for, will be shown in this pane.
1. Click the Services link.
2. Select the Services tab. The Configure Services pane displays a list of the installed services.
3. Select a service and then configure it. You can enable the service in the service's Configure pane or,
later, in the Settings pane for the connector or device that will use the service.
2.2- Configure the connector profiles
Configure one or more profiles for the installed connectors that will be used on the scanning devices. You
can create multiple profiles for each connector and you can activate each connector profile on multiple
devices.
1. Select the Connectors tab. The Configure Connectors pane displays a list of the installed
connectors. Note: Only the connectors that you have valid license for, will be shown in this pane.
You can refresh the list of the available services by right clicking the Connectors pane and selecting
Refresh connectors from the context menu.
2. Select the connector for which you want to configure a profile.
1
3. Specify the settings for the connector profile and then click Save current profile.
2.3- Configure devices
Configure one or more eCopy devices. If you are using the simulator, proceed to step 3.
1
Most connectors offer a Wizard option; eCopy recommends that you use the Wizard to initially configure a connector profile. You can create
multiple profiles by clicking Save current profile as, entering a name for the new profile, and then clicking Save.