Installation guide

Setting Description
Folder location The full path and file name for the folder. The location must be in the current Windows
domain or in a trusted Windows domain (it can be even on the local machine where the
ShareScan Manager is running, but you have to make it a shared network folder with
the proper access rights. Click the button on the far right side in the folder location
value area to select file location.
The Browse for folder window appears that allows you to browse the network for a
shared folder. If you type in a folder location, make sure you use a UNC format
(\\servername\foldername) – a mapped drive format cannot be used.
Credentials You must have access rights to the specified location. Enter the following credentials
to access the Activity Tracking folder:
l User name: User's login name.
l Password: User's password (hidden characters).
l Domain: The domain associated with the user's login name and password.
5.2.2 - The eCopy Image Control service
The eCopy Image Control service is an eCopy document service designed to enhance the eCopy scanning
and image capture process. This service enables you to make corrections and clean up scanned images and
thus reducing the need to rescan documents. The functions include despeckling (removing noise),
straightening pages, cropping, smoothing characters, removing halftones and colored backgrounds, and
thickening/thinning scanned lines.Removing lines and enhancing text quality is often needed to prepare text
in a scanned document for Optical Character Recognition (OCR) operations.For poor quality scans or
documents, you may need to perform multiple functions such as straightening pages, despeckling, and
removing lines.
5.2.3 - Configuring Image Control
The Image Control service enables you to save a collection of settings as a profile. You can then associate a
Service profile with the Connector profiles, which allows the Connector to use the functionality of the
service
The Image Control Service is installed with a default profile that you can modify. However, if you plan to
use the service with multiple connector profiles, you may find it easier to create custom service profiles that
match the requirements of the connector profiles. is installed with a default profile that you can modify.
However, if you plan to use the service with multiple connector profiles, you may find it easier to create
custom service profiles that match the requirements of the connector profiles.
5.2.3.1 - To Create A Service Profile
1. In the console tree, select Configure services > Image Control.
2. Select the Image Enhancement tab and then select the settings that you want to use to improve
the readability of your document (see Image Enhancement Settings).